The wing spins until it hits the bracket and you tighten the bolt. This keeps you from needing a wrench to keep the nut from spinning. If you're ...
Would recommend changing out the 14mm bolts and nuts Jeep uses with some 9 /16"x3" grade 8 bolts to avoid wallowing of the mount holes ...
It also helps if you have someone to help keep the bolt secure (using a wrench) while you tighten the nut or vice-versa. I've done it by myself in ...
I got the northridge bolt kit and they came with lock nuts.
Alright, can I pull the track bar while the jeep is on the ground or will I ...
You dont need to jack anything up. Just park the jeep in a flat level spot and unbolt the axle side to lift it out of the bracket, then tighten that jam nut ...
In fact, unless you've installed an adjustable front track bar and adjustable
How tight is tight enough?
Long story short, the damn track bar will not tighten on the axle mount. The bolt and flag nut are in perfect working condition, the bushing isn't ...
I am having a recurring issue with the jam nut on my rear Trackbar. I tighten the nut as much as I can but after a couple hundred miles the nut is ...