This example shows how to enable the MHSRP configuration shown in Figure 38 -2. You need to enter the standby preempt interface ...
Tracking is only for HSRP to detect some changes in the routing table. · Interface tracking allows you to specify another interface on the router for the HSRP process ...
Indicates that HSRP tracks Serial0 interface.
SW2#show standby | include Active Active virtual MAC address is ...
Router R2. R2#show track 1 Track 1 Interface Serial1/0 line-protocol Line protocol is Up 3 changes, last change 00:28:39 Tracked by: HSRP ...
Router1#show track Track 11 Interface Serial1/1 ip routing IP routing is Down (hw admin-down, ip disabled) 1 change, last change 00:12:48 Tracked by: HSRP ...
MORE READING: Cisco new Router Series ASR 1000
Hot Standby Router Protocol (HSRP) prioritizes a series of routers as the
Route tag 4. R2#show track 1. Track 1. IP route 0.0.0.0 0.0.0.0 reachability.
Configures HSRP priority. track(object). Configures an interface so that the Hot Standby priority changes based on the availability of other interfaces. show hsrp.