This command was introduced. Examples. This example shows how to display information about tracked interfaces: switch# show track interface.
Debug IP sla & track results are here: ROUTER-MD#show debug Track debugging is on IP SLAs: TRACE debugging is on for entries: 200 ERROR debugging is ...
Use the show track command to display information about objects that are tracked by the tracking process. When no arguments or keywords are specified, ...
Return to privileged EXEC mode. Step 6. show track object-number. Verify that the specified objects are being tracked. Step 7. copy running-config startup- config.
show track. To display information about objects that are tracked by the tracking process, use the show track command in privileged EXEC mode.
To verify the track status use the use the show track command as shown below:.
show track. To show information about object tracking, use the show track command. show track [object-id] [interface | ip route] [ brief].
Symptom: When issue show track command on the N7K,the switch returns " service not responding". So,no info output for the command. Track ...
show track object-number. Verify that the specified objects are being tracked. Step 9. copy running-config startup-config. (Optional) Save your ...
To display information about the IP route track table: